-40%
【Buy 10 Pay 6,add 10】JAYO 3D Printer Filament PLA Matte 1.75mm 1.1KG With Spool
【Buy 10 Pay 6,add 10】JAYO 3D Printer Filament PLA Matte 1.75mm 1.1KG With Spool
【Buy 10 Pay 6,add 10】JAYO 3D Printer Filament PLA Matte 1.75mm 1.1KG With Spool
【Buy 10 Pay 6,add 10】JAYO 3D Printer Filament PLA Matte 1.75mm 1.1KG With Spool
【Buy 10 Pay 6,add 10】JAYO 3D Printer Filament PLA Matte 1.75mm 1.1KG With Spool
【Buy 10 Pay 6,add 10】JAYO 3D Printer Filament PLA Matte 1.75mm 1.1KG With Spool
【Buy 10 Pay 6,add 10】JAYO 3D Printer Filament PLA Matte 1.75mm 1.1KG With Spool
【Buy 10 Pay 6,add 10】JAYO 3D Printer Filament PLA Matte 1.75mm 1.1KG With Spool
【Buy 10 Pay 6,add 10】JAYO 3D Printer Filament PLA Matte 1.75mm 1.1KG With Spool
【Buy 10 Pay 6,add 10】JAYO 3D Printer Filament PLA Matte 1.75mm 1.1KG With Spool
【Buy 10 Pay 6,add 10】JAYO 3D Printer Filament PLA Matte 1.75mm 1.1KG With Spool
【Buy 10 Pay 6,add 10】JAYO 3D Printer Filament PLA Matte 1.75mm 1.1KG With Spool
【Buy 10 Pay 6,add 10】JAYO 3D Printer Filament PLA Matte 1.75mm 1.1KG With Spool
【Buy 10 Pay 6,add 10】JAYO 3D Printer Filament PLA Matte 1.75mm 1.1KG With Spool
【Buy 10 Pay 6,add 10】JAYO 3D Printer Filament PLA Matte 1.75mm 1.1KG With Spool

【Buy 10 Pay 6,add 10】JAYO 3D Printer Filament PLA Matte 1.75mm 1.1KG With Spool

$ 8.83

  • Brand: JAYO
  • Compatible Model: For 3D Systems ProJet 1200, For 3D Systems CubePro, For Airwolf 3D AXIOM, For Airwolf 3D AXIOM Dual Extruder, For Airwolf 3D AXIOMe, For Anet A8, For Creality 3D CR-10, For FlashForge Creator Pro
  • Filament Diameter: 1.75 mm
  • MPN: Does not apply
  • Material: PLA MATTE
  • Type: Filament

Description

PLA Matte Filament 1. Environmental friendly, non-toxic, biodegradable; ; 2. Low shrinkage ; 3. Printing odorless, the surface of the printing model is matte; Suitable for all kinds of FDM3D printer, suitable for printing crafts, artwork and samples of industrial design, etc. parameter Wire diameter: 1.75mm Tolerance: ± 0.02MM Printing temperature: 205-215 ° C. Bottom plate temperature: glue water is required if it is not heated. No glue water is required for heating from 50-60 ° C Rally (KGF): 8-13 Melt index: 3-7 g / 10 min (190 ° C, 2.16 kg) Elongation at break: 4%. Printing speed: 50-100 MM / s Air bubbles: 100% zero bubbles Net weight: 1.1 kg / roll Gross weight: 1.4kg / roll Length: 1.75 mm (1.1 kg) = 360 m